2024 American Augers Directional Drill Maxi-Rig DD-440T
- Year 2024
- Make American Augers
- Model Directional Drill Maxi-Rig
- Engine Model: QSX15 Tier 4 final or Tier 3 (depending on country of purchase)
2024 American Augers Directional Drill Maxi-Rig DD-440T
2024 American Augers Directional Drill Maxi-Rig DD-440T
Features may include:
The industry standard 200 tonne drill with a proven track record of reliable performance. It is the model that all others are compared to.- Wireless ground drive control allows the operator to set the unit up without being constrained to one area.
- Standard Telematics for service information and office communication with daily work progress
- Full length traveling wrenches that can be removed for shipping and servicing
- New 3 ½ inch fluid course for up to 825 gpm of drill fluid flow
Engine
Engine Manufacturer
Cummins
Engine
Model: QSX15 Tier 4 final or Tier 3 (depending on country of purchase)
Engine Power
600 HP (447 kW)
Fuel System
Fuel Type
Diesel
Motor
Motor Type
Carriage Motors: Hydraulic 1017 cc, Variable Displacement | Rotary Motors: 160cc Hydraulic Axial Piston/Variable Displacement | Wrench Assembly Motor: Hydraulic LSHT, 18.3 CIR
Drivetrain
Drive System
Rotary System: Pinion & Gear Drive with Infinitely Variable Torque
Gearbox
Carriage: Planetary Drives | Wrench: SGL
Brakes
Brake System Type
Rotary Brakes: Spring Applied/Hydraulic Release | Wrench Assembly: Spring Applied/Hydraulic Release
Battery
Battery
(2) Deka 908DMF 12 V, 1450 CCA
Operational
Operating Conditions
Maximum Thrust/Pullback: 440,000 lbs. (200 Tonnes) | Carriage System: 440,000 lbs. (200 Tonnes) | Maximum Rotary Torque: 60,000 ft-lbs. (80,000 Nm) @ 0 – 25 RPM | Maximum Breakout Torque: 230,000 ft-lbs. (311,839 Nm) | Maximum Makeup Torque: 152,000 ft-lbs. (206,085 Nm) | Drill Angle: 10° - 18°
Operating Speed
Maximum Carriage: 95 ft. (29 m)/minute | Maximum Rotary: 97 RPM | Maximum Travel: 1.4 mph (2.25 kph)
Hydraulics
Hydraulic Flow
Mud Flow Rate: Permits up to 825 U.S. Gallons /minute
Maximum Pressure
Mud: 1,500 psi (103.4 bar)
Lights and Safety
Safety Features
Es!Lok – Exit Side Lockout System with 1 mile (1.6 km) Range Wiggle Steer® | Free standing operator's console with pressure gauges with 17" Touch Screen Display | Free standing operator's console with pressure gauges with 17" Touch Screen DisplaySafety system package with ZapAlert operator's manual and other unit support materia
Dimensions
Dimensions
Fluid Course: 3.5 in. (88.9 mm) | Clamp/Grip Range: 3 in. – 11 3/4 in. (76 – 298 mm) OD | Drill Pipe: Range II – 34 ft. (10.4 m) | Transport Dimensions: 50 ft. 9in. (15.47 m)
Bore
Hydraulic Wrench Cylinder: 8 in. (203 mm)
Stroke
Hydraulic Wrench Cylinder: 3 in. (76.2 mm)
Width
8 ft. 2 in. (2.51 m)
Height
11 ft. 10 in. (3.61 m)
Capacities
Fuel Capacity
160 U.S. Gallons (605 L)
Hydraulic Capacity
200 U.S. Gallons (757 L)
Weights
Weight
Total: 98,060 lbs. (44,479 kg) | Total Weight w/o Wrench: 90,260 lbs. (40,941 kg) – Wrench is Removable for Lighter Transport
Features
Features
Quiet-Pak®: Noise reducing acoustical foam in the engine enclosure. | Wiggle Steer®: The Wiggle Steer® System provides the operator of a directional drill the means to rotate the drill pipe and subsequently the cutting head on the drill string back and forth over a predetermined range. This back and forth motion would cause the hole made by the cutting head to be more open in a particular direction and therefore facilitate steering of the drilling pipe in that direction underground. | Mud Swivel: Rear Mounted, 5 in. (127 mm) IFLH Pin | Wrench Travel: Wrench has full-length thrust frame travel with hose carrier