2024 American Augers Directional Drill Maxi-Rig DD-660RS

Information

2024 American Augers Directional Drill Maxi-Rig DD-660RS

Features may include:

Our newest Maxi rig design that provides the latest in mobility and performance
  • Rapid setup features to decrease the time and effort to get to work
  • Hydraulically adjusted pipe support ensuring the pipe joints are always in the right position
  • Dual power units that feature ROOTS (Run On One Technology System) to reduce fuel cost during the pilot bore
  • Standard Telematics for communicating with the rig during operation

Photos

Highlights

  • Geismar, Louisiana
  • 2024
  • American Augers
  • Directional Drill Maxi-Rig DD-660RS
  • Model: QSX15 Tier 4 Final (or Tier 3 depending on country of purchase)
  • Available
  • Drill Rig Maximum: 8 ft. 2 in. (2.5m) | Power Pack Maximum: 8 ft. (2.43 m)
  • Drill Rig Maximum (Transport): 11 ft. 6 in. (3.68 m) | Power Pack Maximum: 9 ft. 5 in. (2.88 m)

Specifications

  • 2024
  • American Augers
  • Directional Drill Maxi-Rig
  • DD-660RS
  • Directional
  • Model: QSX15 Tier 4 Final (or Tier 3 depending on country of purchase)
  • Cummins
  • 600 HP (447 kW) each | Auxiliary Power Unit: 9.9 HP Hatz 1840 diesel engine for rig setup
  • Carriage Motors: Radial Piston/Dual Displacement
  • Carriage System: Rack & Pinion, (4) Pinion with Adjustable Force Limiter | Rotary System: Pinion & Gear Drive w/Infinitely Variable Torque | Wrench System: Triple Jaw Wrenches with 12 in. (305 mm) separation
  • Carriage: Planetary Gearboxes
  • Processor Controls: Processor Controls Sauer Danfoss micro-processor controls with touch screen,
  • Carriage: Only on Carriage
  • (2) Deka 908DMF 24 V, 1450 CCA
  • Maximum Thrust/Pullback: 660,000 lbs. (300 Tonnes) | Maximum Rotary Torque: 80,000 ft-lbs. (108,460 Nm) @ 0 – 34 RPM | Minimum Rotary Torque: 30,000 ft-lbs. (40,675 Nm) @ 0 – 90 RPM | Maximum Breakout Torque: 210,000 ft. lbs. (285,000 Nm) | Maximum Makeup Torque: 100,183 ft-lbs. (135,252 Nm) | Drill Angle: 10° - 18°
  • Maximum Carriage: 107 ft. (33 m)/minute | Maximum Rotary: 90 RPM
  • Hydraulic Filter: High Pressure Filtration and Return to 6 Micron ABS
  • Piston Pump, Closed Loop | Auxiliary Pump: Piston Pump, pressure Compensated
  • Mud Flow Rate: Permits up to 1000 U.S. Gallons (3,785 L)/minute flow
  • Mud: 1,500 psi (103 bar)
  • Fluid Course: 3.5 in. (88.9 mm) for increased downhole hydraulic power | Fluid Course: 3 3/4 in. (95.25 mm) for increased downhole hydraulic power | Clamp/Grip Range: 3.5 in.– 10.5 in. (89 – 267 mm) OD | Carriage to Wrench Clearance: 36 ft. (11 m) max. | Drill Pipe: Range II – 30 ft. (9.1 m) | Cabin: 8x12 ft. skid (8x20 ft. available)
  • Drill Rig Maximum: 64 ft. 5 in. (19.5 m) | Power Pack Maximum: 19 ft. 8 in. (6 m)
  • Drill Rig Maximum: 8 ft. 2 in. (2.5m) | Power Pack Maximum: 8 ft. (2.43 m)
  • Drill Rig Maximum (Transport): 11 ft. 6 in. (3.68 m) | Power Pack Maximum: 9 ft. 5 in. (2.88 m)
  • 650 U.S. Gallons (2,460 L)
  • Travel: 108,000 lbs. (48,988 kg) | Power Pack Total: 35,500 lbs. (16,103 kg)
  • Wrench Travel: Wrench can Travel the Full Length of the Thrust Frame | Pipe Capacity: 4