2025 Ditch Witch® American Augers® DD240T

Information

2025 Ditch Witch® AMERICAN AUGERS® DD240T

THE MID SIZED RIG WITH MAXI POWERS.

The perfect drill for those ready to push their machines to the brink of productivity, the DD240T features full length traveling wrenches usually reserved for maxi-rig models and an MTU Tier 4 Final engine that thrives when worked hard across tough jobs and even tougher conditions.

Features may include:

  • MTU TIER 4 FINAL ENGINE FEATURES 523 HP AND 240,000 LBS. OF THRUST AND PULLBACK.
  • EQUIPPED WITH A STANDARD SLIP SPINDLE THAT ALLOWS FOR EASY CHANGE OUT WHEN NECESSARY.
  • QUIET-PAK®ENGINE ENCLOSURE REDUCES DBS FOR QUIETER OPERATION.
  • FULL LENGTH TRAVELING WRENCHES ASSIST STUBBORN TOOL JOINTS AND ALLOW THE RIG TO PULL TOOLING UP TO THE DRILL’S FRAME.
  • ON-BOARD/OFF-BOARD CABIN AND PUMP ALLOW YOU TO TAILOR YOUR MACHINE SET-UP TO BETTER FIT YOUR JOBSITE ENVIRONMENT.

Photos

Highlights

  • Geismar, Louisiana
  • 2025
  • Ditch Witch®
  • American Augers® DD240T
  • C13B
  • Available
  • 8.16 ft (2.49 m)
  • 11.5 ft (3.5 m)

Specifications

  • 2025
  • Ditch Witch®
  • American Augers®
  • DD240T
  • Directional
  • C13B
  • Manufacturer's gross power rating: 536 hp (400 kW)
  • CAT
  • Tier 4 final
  • 2,200 rpm
  • 2 Deka 908DME 12 V, 1450 CCA - 24 V System
  • Rotary speed, max: 150 rpm| Carriage speed: 150 ft/min (46 m/min) | travel speed Forward/reverse: 1.37 mph (2.2 km/h)
  • Thrust /pullback: 240,000 lb (108 Tonnes) | Rotary torque, max: 43,900 ft·lb (59,520 Nm) | Breakout torque, max: 80,000 ft·lb (108,465 Nm) | Makeup torque, max: 67,000 ft·lb (85,010 Nm)
  • 1,300 psi (89.6 bar) | Pump: 1,300 psi (89.6bar)
  • 650 gpm (2,460 l/min) | Pump: 300 gpm (1,136L/min)
  • Drill pipe: 31-34 ft (9.4-10.4 m) | Fluid course: 3 in (76 mm) | Clamp/grip range: 4.5-9.5 in (114-241 mm) | Side-entry: sub 2.875 in IF (73 mm IF) | Drill angle: 10-18° | Outside tube diameter: 4.5-5.5 in (114.3-139.7 mm) | Tool joint outside diameter: 6.625-7.5 in (168.3-190.5 mm)
  • 52.5 ft (19.05 m) | of drill pipe: 20 ft (6.1 m)
  • 8.16 ft (2.49 m)
  • 11.5 ft (3.5 m)
  • 178 gal (674 L)
  • 86,860 lb (39,399 kg)
  • Carriage motors: 4 Axial piston / dual displacemen | Carriage brakes: 2 Spring-applied / hydraulic release | Rotary motor: 2 Radial piston variable | Wrench design: Closed top